- BrandMAIPT
- Country of manufactureChina
- Class of power consumptionA+
- Climate classN
- Type of refrigeratorCompressor
- Running Weight1730kg ~ 21800kg
- Net Weight640kg ~ 9000kg
- Waterproof PumpIP55
- Fan MaterialAluminium Alloy
- Filler MaterialFire Retardant PVC
- Tower Body MaterialHDG/Stainless Steel
- Air Capacity6400m3/H ~ 384000m3/H
- Flow Rate10m3/H ~ 300m3/H(Customized)
- Cooling Capacity58kw ~ 1744kw
Closed Loop Cross Flow Square Water Cooling Tower
BRIEF DESCRIPTION
The MPCT-TD/TS series use a combination of secondary heat exchange coil where air and water flow in the same direction and PVC filler, which enables efficient heat transfer. As the air and spray water flow through the coil in the same direction, the spray water can cover the surface of the coil to the maximum extent to ensure that the surface of the coil is completely wet. Compared to the structure of air and water flowing reversely, the formation of dry spots and scale on the coil wall is greatly reduced.
Both of fans and pumps adopt high quality bearings without other wear parts.The fan adopts a direct connection structure so that there is no rotational loss caused by the pulley structure, and the noise is small and the failure rate is low.
INNER STRUCTURE AND MAIN PARTS INTRODUCTION
BRIEF DESCRIPTION
Features | Materials | |||
Space-saving, Light Metal Structure | Cooling System |
Cooling Coil | SUS304 Tube (DN18mm; Thickness: 0.8 mm), anti-freezing type | |
Optimized structural design and using steel structure make the floor area reduced greatly, the running weight is also greatly reduced | Cooling Fin | PVC Vacuum plastic, on-line lamination process | ||
Spraying Pipe | Corrosion resistant PVC | |||
Good Corrosion Resistance | Sprayer | ABS, uniform water distribution, no dead corner, no dry point | ||
Tower body material is FRP with good corrosion resistance, the light stabilizer in resin has good anti-aging properties and won't fade. | Spray Pump | Cast iron material, Siemens motor, High flow and low pump head | ||
Circulating System |
Buffer Tank | SUS304 material; Usage: Buffering, Exhausting, Pressure maintaining | ||
Durable and Long Lasting | Water Pump | One used and the other is backup, controlled by frequency converter | ||
The reinforced fiberglass without corrosion, reducing maintenance costs. All tower supports are made of thick steel and treated with hot dip zinc. | Fan Power System |
Fan | Extruded aluminum alloy (airfoil type); high strength, corrosion resistance | |
Motor (IP55.F) | Special for cooling tower, fully closed, low noise, maintenance-free | |||
Combined type Design | Bearing | Bearing steel, NSK/SKF | ||
It's free to choose multiple cooling tower combined use as needed. The accessories are portable and easy to transport and install. | Dehydrator | Original PVC sheet from FORMOSA PLASTICS, water saving. | ||
Tower Body |
Front Panel | Al-Zn alloy coated steel sheet, high intensity, corrosion resistance | ||
Energy-saving | Structural Steels | Hot Dip Galvanized material, three-times preservative treatment | ||
Low wind resistance and heat dissipation filler combined with the unique streamlined design of the ventilator, save power consumption greatly. | Bottom Frame | U-steel after special preservative treatment, long-lasting | ||
Low Noise | Standard Parts | Hot Dip Galvanized material, corrosion resistance | ||
Large size streamlined designed fan blade, combined with low speed running to make fan especially quiet | Sealing Tape | Butyl rubber, reliable sealing | ||
Electric Control Cabinet | Thickness: 1.5mm; Powder coating, LG contactor |
Remark: The materials of the above different parts are subject to customization accoring to unique requirements.
TECHNICAL SPECIFICATION
Model | Cooling Capacity | Overall Dimension | Cooling Fan | Pump | Pipeline Size | Weight | |||||||||
Water Flow | Thermal Power | L | W | H | Blade | Power | Air Capacity | Power | In/Outlet | Overflow | Drain | Make up | N.W. | R.W. | |
m3/h | kw | mm | mm | mm | mm | kw | m3/h | kw | mm | mm | mm | mm | kg | kg | |
MPCT-TD series Closed Type Counter Flow Cooling Tower | |||||||||||||||
MPCT-10TD | 10 | 58 | 2100 | 1500 | 2480 | Ф700 | 0.55 | 6400 | 0.55 | DN65 | DN25 | DN25 | DN25 | 640 | 1730 |
MPCT-15TD | 15 | 87 | 2100 | 1500 | 2700 | Ф750 | 0.75 | 9600 | 0.55 | DN65 | DN25 | DN25 | DN25 | 710 | 1880 |
MPCT-20TD | 20 | 116 | 2100 | 1500 | 2950 | Ф800 | 0.75 | 12800 | 0.55 | DN80 | DN25 | DN25 | DN25 | 810 | 1920 |
MPCT-30TD | 30 | 174 | 2300 | 1800 | 3080 | Ф800 | 1.5 | 19200 | 0.75 | DN80 | DN25 | DN25 | DN25 | 920 | 2320 |
MPCT-40TD | 40 | 232 | 2800 | 1800 | 3130 | Ф1000 | 1.5 | 25600 | 1.1 | DN100 | DN32 | DN32 | DN32 | 1200 | 2860 |
MPCT-50TD | 50 | 290 | 2800 | 2000 | 3330 | Ф1000 | 1.5 | 32000 | 1.1 | DN100 | DN32 | DN32 | DN32 | 1380 | 3200 |
MPCT-65TD | 65 | 378 | 2950 | 2300 | 3350 | Ф1200 | 2.2 | 41600 | 1.5 | DN100 | DN32 | DN32 | DN32 | 1620 | 3980 |
MPCT-80TD | 80 | 465 | 3600 | 2300 | 3500 | Ф1200 | 3.0 | 51200 | 2.2 | DN125 | DN40 | DN40 | DN40 | 2280 | 5330 |
MPCT-100TD | 100 | 581 | 4300 | 2600 | 3550 | Ф1200 | 4.0 | 64000 | 3 | DN125 | DN40 | DN40 | DN40 | 2800 | 7150 |
MPCT-125TD | 125 | 727 | 4800 | 2700 | 3600 | Ф1500 | 5.5 | 80000 | 3 | DN150 | DN40 | DN40 | DN40 | 3290 | 7780 |
MPCT-150TD | 150 | 872 | 5300 | 3200 | 4340 | Ф1500 | 4.0 | 64000 | 5.5 | DN150 | DN40 | DN40 | DN40 | 3880 | 9800 |
MPCT-TS series Closed Type Cross Flow Cooling Tower | |||||||||||||||
MPCT-80TS | 80 | 465 | 2300 | 4300 | 3520 | Ф2200 | 5.5 | 102400 | 1.1*2 | 100*2 | DN40 | DN40 | DN40 | 2340 | 5780 |
MPCT-100TS | 100 | 581 | 2300 | 4500 | 3600 | Ф2200 | 5.5 | 128000 | 1.1*2 | 100*2 | DN40 | DN40 | DN40 | 2400 | 6300 |
MPCT-125TS | 125 | 727 | 2600 | 5100 | 3600 | Ф2500 | 7.5 | 160000 | 1.5*2 | 100*2 | DN40 | DN40 | DN40 | 2780 | 7400 |
MPCT-150TS | 150 | 872 | 2600 | 5300 | 3600 | Ф2500 | 11 | 192000 | 2.2*2 | 125*2 | DN40 | DN40 | DN40 | 3360 | 8450 |
MPCT-175TS | 175 | 1017 | 3100 | 5800 | 3700 | Ф3000 | 11 | 224000 | 2.2*2 | 125*2 | DN40 | DN40 | DN40 | 3620 | 10400 |
MPCT-200TS | 200 | 1163 | 3100 | 6000 | 3700 | Ф3000 | 15 | 256000 | 3*2 | 125*2 | DN40 | DN40 | DN40 | 3930 | 11200 |
MPCT-225TS | 225 | 1308 | 3300 | 6500 | 3700 | Ф3200 | 15 | 288000 | 3*2 | 150*2 | DN40 | DN40 | DN40 | 4340 | 12900 |
MPCT-250TS | 250 | 1453 | 3300 | 7100 | 4700 | Ф3200 | 18.5 | 320000 | 3*2 | 150*2 | DN50 | DN50 | DN50 | 6500 | 14500 |
MPCT-300TS | 300 | 1744 | 3600 | 7800 | 5400 | Ф3500 | 22 | 384000 | 4*2 | 150*2 | DN50 | DN50 | DN50 | 9000 | 21800 |
Remark: 1. Design Conditions: Hot Water(inlet water) Temp.: T1=37ºC; Cold Water(outlet water) Temp.: T2=32ºC
Dry Bulb Temp.: TDB=31.8ºC; Wet Bulb Temp.: TWB=31.8ºC; Atmospheric Pressure: P=9.94x104Pa
2. Above specifications are for cooling tower with single fan, each model can be used alone or combined as needed.
3. The delivery lift of cooling tower is approximately equal to its height(H).
WHY CHOOSE MAIPT
>> You want experience… |
Experienced R&D team bring more than 10 years of process cooling & heating experience with knowledgeable application, product and service specialists available to discuss your needs. |
>> You want someone who understands your process... |
Provided with experience in a wide range of process cooling & heating industries. When you give us the chance, we will show the rich experience and get you the correct solution to your problems. |
>> You want a product that fits your unique needs... |
Offer a wide range of standard units, what's more, our application specialists can suggest the customized units to meet unique needs. |
>> You want specialized control... |
Build our own system controls from tailor made embedded micro-processor base products to PLC options. System control makes the difference in your process repeatability, efficiency and reliability. |
>> You want professional design manufacturer… |
MAIPT specialize in industrial fluid process temperature control fields, and provide the complete systems solutions. |
>> You want energy efficient solutions... |
Our specialists are aware of the rising cost of energy and the pressure to reduce energy consumption and we offer many energy saving products that favor lifetime costs. |
>> Our Service: |
OEM & ODM, or any other unique customized demands are acceptable. |
Any price inquiries or technical inquiries will be responded within 24 hours. |
Experienced technical engineers will give the model selection guide or help design the customized model. |
Detailed quotation scheme and system configuration will be provided to the customer together. |
The whole order process is tracked throughout, |
order production → performance test → packaging → transportation → customs declaration → shipment |
customer will receive the notification mail (include photos, report or other documents) in each process. |
Besides the temperature control units, other install parts or auxiliary equipments is optional according to customers' requirements. |
All necessary installation documentation (e.g. Electrical diagram, User Manual) will be provided in both electronic copy and hard copy. |
Perfect after-sales service system, it's including: |
Technical guidance, detailed machine maintenance methods, troubleshooting solutions, regular return visit etc. |
>> Our Warranty |
All the products are passed strict test, and MAIPT provide 15 months guarantee since the date of bill of lading. During this guarantee period, MAIPT provide spare parts without any charge in case of quality discrepancy caused by us. If out of guarantee period, we still can charge the buyer cost price of spare parts and provide Technical Product support for customers. |