- BrandОАО «Энергомаш»
- Country of manufactureRussia
Products: Centrifugal supercharger 6500, 7500, to buy from the manufacturer in Russia and for export.
Description:
A centrifugal blower (6500, 7500) is a single - cylinder machine single stage double inlet.
Two rectangular suction nozzle directed upwards, the discharge pipe located in the lower part of the cochlea and is directed horizontally to the left when viewed from the drive end.
Centrifugal blower includes:
- welded body with inserts
- rotor
- bearing housings with inserts
- seals
- foundation frames.
The compressor casing welded, the housing is made of sheet steel, has slots in the vertical and horizontal planes and comprises two suction chambers and snails. Vertical connector completely assembled at the factory and can not be disassembled. The rotor of the blower impeller has one double inlet. Rotors superchargers 6500 - 11 - 4 (6500 - 11 - 3) and 7500 - 11 - 3 (7500 - 11 - 1) are interchangeable. Retaining ring fitted onto the rotor shaft.
Rotor wheels come in two variants riveted and welded.
Impeller riveted and welded construction consists of a central disk, and two tires of the blades. To drive the suction side of the blade before entering the bolted wear protection (lattice). Exchangeable anti lattice serve to improve the wear resistance gazoobrazivnomu elements impellers of centrifugal blowers. Lattices facilitate uniform distribution of abrasive particles throughout the volume of the gas stream at the inlet of the impeller, preventing local wear, and reduces the intensity of erosion processes. Wheel life can be prolonged up to two times.
shoulder blades
Blades Z shaped section attached to the drive tires and riveted or welded (depending on model).
In addition to the rotor shaft impeller planted sleeve retaining ring, balancing wheels (with weights), the sleeve (shank) and the tooth clutch. The shaft ridges vytachany maslootboynyh seal. Balancing wheels with weights are used for the partial removal of the rotor unbalance arising during operation of the machine, which can be done without opening the blower housing.
To install the rotors of centrifugal compressors 6500 - 11 - 4 6500 - 11 - 3 7500 - 11 - 1 7500 - 11 - 3 in the blower housing 6500 - 12 - 1 6500 - 12 - 2 and vice versa requires replacement tegmental seals.
All plugs and impellers are put onto the shaft with an interference fit. The impeller is keyed connection with the shaft, statically balanced and the rotor is dynamically balanced.
Riveted rotor design has some advantages with respect to the rotors in the weld performance:
- the possibility of multiple replacement of rotor blades
- ZOHGSA use of high - strength material for the manufacture of rotor blades for manufacturing can significantly extend the life of the rotor
- presence removable antiwear protection (lattice).
The main types of compressors and components (rotors, wheel), produced by JSC "Energomash"
machine name |
Number drawing machines |
№ rotor Drawing |
№ wheel Drawing |
hull number |
H - 2900 |
|
1384.025.SBV |
|
|
H - 2900 - 11 - 1 |
|
E1384.025SBG |
|
|
H - 3300 - 12 - 1 |
|
3332.025SB (M) |
|
|
H - 3500 |
|
1301.025.RSB |
|
|
|
|
2317.025.SBA |
2317.025.SB4 |
|
H - 3600 - 11 - 1 |
|
376.025.SB |
|
|
H - 6500 - 11 - 1 |
|
354.025.RSB |
354.025.SB1 |
|
H - 6500 - 11 - 1 upgraded 7500 |
|
1382.025.RSB |
1382.025.SB1 |
|
H - 6500 - 11 - 3 |
|
|
354.025.SB1 |
|
H - 6500 - 11 - 4 |
2315.000SB |
2315.025.SBA |
2315.025.SB11 |
2315.001.SB |
|
2315.000 - 01SB |
2315.025.SBA |
2315.025.SB11 |
|
|
2315.000 - 04SB |
354.025.SB |
354.025.SB1 |
|
|
2315.000 - 05SB |
354.025.SB |
354.025.SB1 |
|
|
2315.000.SBA |
2315.025SBB |
2315.025SB14A |
|
|
2315.000 - 01SBA |
2315.025SBB |
2315.025SB14A |
|
|
|
E - 354.025.RSB |
354.025.RSB1 |
|
|
|
354.025.RSB15E |
354.025.RSB1 |
|
H - 7500 - 11 - 2 |
|
E - 1382.025.SB |
1382.025.SB1 |
|
|
|
1382.025.SBB |
2330.025.SB5 |
|
H - 7500 - 11 - 3 |
2315.000 - 02SB |
2315.025 - 01SBA |
1382.025.SB6 |
|
|
2315.000 - 03SB |
2315.025 - 01SBA |
1382.025.SB6 |
|
|
2315.000 - 06SB |
1382.025.SBA |
1382.025.SB1 |
|
|
2315.000 - 07SB |
1382.025.SBA |
1382.025.SB1 |
|
|
2315.000 - 02SBA |
2315.025 - 01SBB |
1382.025.SB13A |
|
|
2315.000 - 03SBA |
2315.025 - 01SBB |
1382.025.SB13A |
|
H - 7700 - 12 - 1 |
|
2315.025.01SBB |
0008.025.SB1A |
|
H - 8000 |
|
0008.025.SB |
|
|
H - 8500 - 11 - 1 |
2338 SB1 |
E - 2338.025.RSB |
2338.025.SB7 |
2338.001.SB |
|
|
2338.025.SB |
2338.025.SB2 |
|
|
|
2338.025.SBN |
2338.025.SB7N |
|
H - 9000 - 11 - 4 |
|
0009.025.SB |
1318.025.SBA |
|
H - 9000 - 11 - 4 (5) |
|
1318.025.SB |
1318.025.SB5 |
|
H - 9000 - 11 - 5 |
|
0009.025.SB |
0009.025.SB1 |
|
H - 9000 - 31 - 3 |
|
1346.025.SBV |
|
|
H - 10000 - 11 - 1 |
|
3300.025SB |
3300.025SB7 |
|
|
|
|
3300.025SB2 |
|
|
|
|
3300.025SB1 |
|
H - 13000 |
|
|
0013.025.SB1 |
|
Method of payment: Prepayment
Shipping Form: EXW, of FCA - Russia, Chudovo, Novgorod region.
Shipping details:
Station: Miracles - Moscow Oktyabrskaya railway. d.
station code: 042003
Company code: 3613
The company produces:
- centrifugal blower
- compressors
- Oil coolers
- Air coolers (intermediate and end)
- High pressure ventilators
- Fan high pressure for general industrial use
- Compressors type RTKV
- Plain bearings (inserts)
- heat transfer elements
- Regulating valves - valves, butterfly valves.
- Seals for centrifugal machines (compressors, blowers).
- Blower pneumatic VI 4.5 / 4250 PS