- BrandRema Tip Top
Cement PC-4 PLASTIC CEMENT
Instruction for application of Cement PC-4
Two-component Cement PC-4 glue for repair and production of joints of conveyer belts from PVC polyvinylchloride, repair of products from soft polyvinylchloride.
Ambient temperature and materials: from +10 °C to +45 °C.
Not to allow direct exposure to sunlight and temperature drop below "dew point" (formation of condensate).
The stuck together surfaces: dry, cleared of chemicals, greasings and oils.
Polyvinyl chloride PVC of a surface: it is vigorous to zasherokhovat, for example, a round metal brush, to smooth out thin products from polyvinyl chloride an emery paper (there should not be smooth sites of a surface).
Fabric: to remove the sherokhovalny tool the polyvinylchloride remains, to carefully zasherokhovat fabric (not to allow its damage) to Remove in the dry way dust from sherokhovalny processing.
Mixing of Cement PC-4:
To carefully mix necessary amount of Cement PC-4 glue with E-40 hardener before receiving uniform mix. To spend the received mix within 2 hours ("survivability time").
Putting Cement PC-4 glue:
To apply on each of the stuck together surfaces 2 uniform thin layers (on rough fabric with the high absorbing ability to put 3 layers). To allow the first layer to dry completely (within at least 1 hour). The second layer has to dry up to a condition of easy residual stickiness (test by the finger back). If the second layer dried up, it is necessary to apply glue repeatedly.
To impose the stuck together surfaces at each other, without allowing air inclusions, to prikatat with effort or to press. It is desirable to sustain the places of gluing together subjected to high loadings under a press within not less than 6 hours at a temperature of +20 °C
Observe the safety rules and danger warnings given on containers with liquid materials!
5320352 Cement PC-4 of 0,35 kg
5251122 hardener of Hardener E-40 of 15 g