Car of contact butt welding MSO-606, MS-2008G, MSO-201

The butt welding MSO - 606 car is intended for contact butt welding by a continuous oplavleniye and an oplavleniye with preliminary heating of products from low - carbonaceous to staly with a diameter up to 50 mm, and also reinforcing steel with a diameter up to 25 mm of the class A - IV, A - V.
Technical characteristics
Name of the Value parameter
Rated voltage of a power line, Hz / B 380
The greatest secondary current, kA 52±10
Rated long secondary current 9
The largest power at short circuit, kVA 460
Power at PV=50 100
Nominal force of draft, kN:
— at 9,8mpa (100kgs/cm2) 53
— at 20 MPas (200kgs/cm2) —
Mechanism drive draft zazhatiya pneumatic and el. mechanical
The welded section, mm2:
— from low - carbonaceous steel 100 - 2000
— from the low - alloyed steel 100 - 1250
— from fittings there were C. : AIV, AV 100 - 500
Consumption of the cooling water with a pressure 0,15mpa (1,5kgs/cm2, l/min, not less) 10
Distance between control surfaces of current carrying inserts, mm:
— smaller 10
— bigger 90

Overall dimensions, mm:
- welding car 2050×1240×1380
Weight, kg:
- welding car of 2400.