- BrandЩучинский завод Автопровод, ОАО
- Country of manufactureBelarus
- Outside diameterв ассортименте "
- Conductor materialCopper
- Minimum bend radiusв ассортименте "
Wires are applied to electrical units at stationary laying in lighting and power networks, and also to installation of electric equipment, cars, mechanisms and machines, internal electroinstallations on a rated alternating voltage to 450/750 B inclusive with a nominal frequency up to 400 Hz or constant tension to 1000 V inclusive to wires and on a rated alternating voltage to 300/500 B inclusive with a nominal frequency up to 400 Hz to cables.
Type of a climatic modification on TU 16-705.501-2010-UHL2 in accordance with GOST 15150.
Type of a climatic modification on TU 16-705.502-2011-U in accordance with GOST 15150.
PUV - a wire single-core, with a copper vein, with PVC isolation, without cover;
PUGV - a wire single-core, with a flexible copper vein, with PVC isolation, without cover.
KUVV - a cable with copper veins, with isolation and a cover from polyvinylchloride plastic compound
KUGVV - a cable with copper flexible veins, with isolation and a cover from polyvinylchloride plastic compound.
DESIGN
CONDUCTING VEIN - copper single-wire
ISOLATION - PVC plastic compound. For wires and a cable with an index ng (A)-LS-PVH plastic compound of the lowered fire danger. The isolated veins have a distinctive coloring.
OBOLOCHKA-Puvvng (A)-LS, PUGVVNG (A)-LS-PVH plastic compound of the lowered fire danger.
The NUMBER of VEINS - 1; PUVV one - two - and three-vein; KUVV, KUGVV-dvukh-, three - four - and five-vein.
SECTION of VEINS, mm ²: 0,50; 0,75; 1,0; 1,5; 2,5; 4; 6; 10; 16; 25; 35; 50; 70; 95; 120, 150,185.
TECHNICAL CHARACTERISTICS
The electric resistance of isolation of a cable counted for 1 km of length and temperature of 20 °C has to be not less than 5 Megohms.
Wires are resistant to influence of mechanical blows, linear acceleration, bends, vibration loadings, acoustic noise, mold mushrooms.
Wires do not extend burning at single laying.
Radius of a bend of wires at installation has to be not less than 10 nominal diameters for wires of the PUV, PUVV brand and the KUVV cable and not less than 5 nominal outer diameters for wires of the PUGV brands, PUGVV and a cable of brand of KUGVV. Bend radius for flat wires has to be not less than 10 nominal external sizes on a smaller axis.
It is long the admissible temperature of heating of veins - no more than +70 °C.
Construction length of wires - not less than 100 m, is allowed delivery by lengths not less than 20 m in number of no more than 20% of party.
Average service life of wires - not less than 20 years at observance by the consumer of conditions of transportation, storage, installation and operation. A warranty period of operation - 5 years
Instructions on operation:
- wires are intended for laying in steel pipes, boxes, on trays, etc., for installation of electric chains
- wires are intended for operation at ambient temperature from minus 50 °C to 65 °C and relative humidity to 98%.
- it is long the admissible temperature of heating of veins at operation not has to exceed 70 °C.
The wire of PUV is analog of a wire of PV1 in accordance with GOST 6323
The wire of PUGV is analog of a wire of PV4 in accordance with GOST 6323