- BrandЗавод Кобзаренко
GROUND BUNKER Overload BNP - 12 / E (electric) "ARK"
180 tons per hour!
BNP - 12 / E - intermediate with grain overload or fertilizer from the vehicle, a tipper or a tractor trailer in the bunker - reloader, car or railway carriage.
APPLICATION BNP - 12 / E:
- loading and reloading of grain in wagons, zernoupakovochnye machines, dryers and pr. -
- loading with / agricultural machines involved in the field work.
BNP - 12 / E "Ark" - mobile ground reloading hopper. Thanks to its special construction can be unloaded from the transport side. The hopper is equipped with a mechanism for quick machine translation from the working to the transport position. In case of an emergency stop has a gate for cleaning vertical auger.
BNP - 12 / E can be used to load the spreader or sowing directly in the field, avoiding handling on current, saving considerable time and resources.
Hydraulic board equipped with a protective apron, which prevents spillage of materials under overload.
Opportunities of use and versatility of the BNP - 12 / E makes this machine indispensable in case of overload: fertilizer and seeds to poseve - loading wagons zernoupakovochnyh machines, dryers and conditioners.
Filling railcars is a function of discharging surplus height (5.5 m) of the grain with a split flow.
BNP - 12 / E consists of a receiving hopper, three horizontal screw with a metering slide valve and one vertical screw. The augers are driven by the tractor PTO grade T - 150 K, or the like.
Ground hopper reloading BNP - 12 / E (electrical) "ARK" operates on 380 V. It consists of four motors. A 7.5 kW motor drives the hydraulic machine, through a distributor which controls a hydraulic system (decomposes auger tail lift, the metering slide valve, the transport position "Ark"). Two engine of 4 kW and 5.5 kW drive the horizontal augers, and 18 kW electric motor - vertical. When stopping the vertical auger feeding equipment precludes horizontal grain auger. Total power - 27.5 kW plus 7.5 kW to the electric hydraulic machine in preparation for the work.
Electric hopper "Ark" may be used by the tractor PTO, after removing the drive belt from the electric motors. For driving the tractor PTO BNP - 12 / E has a splined shaft and a universal joint for connection to the tractor. Required tractor power - 82 - 120 hp
Advantages: BNP - 12 allows you to load spreader or drill directly in the field, without reloading on the current.
SPECIFICATIONS:
NAME INDICATOR |
UNITS MEASUREMENT |
VALUE | |||
unloading height | mm | 4300 | 5500 | ||
destiny | Grain, polymer sleeves |
wagons barges |
|||
The diameter of the screw | mm | 400 | 500 | 400 | 500 |
Productivity | t / h at 540 rpm. / min. |
180 | 350 | 180 | 350 |
Hopper dimensions: | mm | ||||
length | 7000 | 7000 | |||
width | 2500 | 2500 | |||
height | 920 | 920 | |||
volume | m 3 | 12 | 12 | ||
Drive unit | electric drive + PTO tractor |
electric drive + PTO tractor |
|||
necessary tractor power |
hp | 82 | 120 |
FEATURES:
- It consists of three horizontal and one vertical screw.
- Two dosing Schieber.
- Solid - rolled coil of 8/4 mm.
- Two - way mechanism for raising and lowering the hopper.
- "The Ark" is powered by 380V electric network. It consists of two electric motors. The total power of electric discharge depends on the height of the BNP - 12E and amounts:
-
- discharging at a height of 4.3 m. - 30 kW plus 3.0 kW drive hydraulic machine in preparation for the work -
- at the height of the discharge of 5.5 m. - 55 kW plus 3.0 kW drive hydraulic machine in preparation for work
- Electric "Ark" may be used by the tractor PTO, after removing the drive belt from the electric motors.
- For driving the tractor PTO electric "Ark" has a splined shaft and a universal joint for connection to the tractor.
- Required tractor power: 82 - 120 hp