Bulk floor of M-150 for alignment of a floor

It is made on it is cement - a sandy basis and a complex of special polymeric additives. introduction in which structure provides good coupling with the basis, durability, elasticity, profitability, safety in operation. Does not contain components, unhealthy.

Application:
It is applied to alignment of the bases of a floor under various floor coverings: linoleum. tile, laminate. parquet, etc.
Preparation:
The basis has to be dry, strong, cleared of dust, dirt, lime, fats.
Surfaces with high water-absorbing ability need to be processed the grounding means for the purpose of decrease in water absorption and increase in adhesion with the basis.
Preparation:
To mix dry mix in manual or with the help the low-reverse electric drill with a nozzle at the rate of 150-160 gr. waters on 1 kg of dry mix before obtaining uniform plastic standard without lumps.
Application:
Solution is applied on previously prepared surface (i.e. the device of indicators), leveled by means of a control lath 2 meters long.
Expense:
The expense averages 1,7 - 1,8 kg of solution on 1 m at a thickness of layer of 1 mm.
Packing:
Paper bags on 25 kg.
Storage:
It is necessary to store in densely closed bags in the dry room on wooden pallets.
Period of storage in an original packing - 6 months.

The manufacturer of material does not bear responsibility for its wrong use, and also for application in other purposes and conditions, unforeseen this instruction.

From the moment of emergence of the present technical specification all previous become invalid.

Specifications