BTE-1-22 the activator of synchronous motors of crucial objects from 100% duplication of all systems
- Customer pickup,
- Courier
- In detail
- BrandИНТМАШ
- Country of manufactureRussia
- Напряжение36В 48В, 75В, 115В, 150В, 230В
- Номер МоделиВТЕ-1-22
- питание силовой частиот согласующего трансформатора (поставляется в комплекте)
- Ток200А, 315А, 400А
- система управленияцифровая (ве идентичных системы управления)
BTE-hkhkh-hkhkh-1-22 the power effective thyristor activator for for crucial objects and process productions of the parts of the equipment which are not allowing shutdown of the production line because of refusal. The BTE-1-22 model differs:
- Automatically duplicated digital control system consisting of two identical full-function controllers. Transition from one controller to another (in case of definition malfunction of one of them, or at the command of the operator) happens is unaccented and does not influence operation of the engine.
- Automatically duplicated power part consisting of two thyristor rectifiers assembled according to the bridge scheme, which are automatically choosing the best power factor
- In a set the transformer (executed on the UNICORE technology with idling current less than 0,3A) with two taps of a secondary winding of a low and high voltage (are connected to the corresponding rectifier)
- Compact case of unilateral service
Application: common industrial mechanisms with low-voltage synchronous motors
energy efficiency | duplication | current, And | tension, In | size of a case, mm | Case |
1. energy saving cosφ=1 function 2. The power transformer is executed on the UNICORE technologies, idling current less than 0,3A 3. Collaboration of rectifiers of the main and forsirovochny with the transformer having two taps. The main rectifier is connected to tap of a low voltage, forsirovochny - to tap of a high voltage. Switching of rectifiers (depending on the required current) reaches the minimum angle of management and as sledstsvy, the form of tension is close to sinusoidal that reduces losses in transformer iron from jet currents |
1. Two full-function control units
2. Two thyristor rectifiers. 3. Food of chains of management from two independent sources (option) |
200
315 |
36
48 75 115 150 230 |
1450x650x430
1650х650х430 |
IP22
IP54 |
Options
Industrial control system interfaces | color TFT display | monochrome OLED display |
Modbus RTU rs485 1200. 115200 bps Modbus TCP/IP network 10/100MБит/с Profibus DP (Modbus RTU through anybustm the module) |
permission: 800x400@64k interface: touch screen networks: rs485 modbus rtu food: = 24B 0,3A speed. range: 0. +55os |
permission: 128x64@1b interface: 3x3 film keyboard networks: RS485 Modbus RTU food: = 24B 0,1A speed. diapazon:-40os and. +75os |
Completeness:
1. activator VTE-xxx-xxx-1-22
2. 3 phase transformer TSZV-hkhkh/0,7-hkhkh/hkhkh/hkhkh
3. user's guide
4. CD disk (service Ajuster program, documentation)
5. USB-AB cable
Reservation of control systems
Two full-function regulators, everyone is equipped with own set of sensors and the power supply unit. In real time exercise mutual control on the communication interface. At violation of one of 6 criteria of quality of operation of the regulator, there is an automatic unaccented transition to the serviceable regulator.
Reservation of power part:
At failure detection of a control path a tiristor (there is no conductivity or untimely inclusion) the main rectifier, work automatically switches to the forsirovochny rectifier. If malfunction is eliminated, then the activator continues to work at the forsirovochny rectifier to a planned stop. If malfunction repeats on the forsirovochny rectifier, the engine is abnormally switched-off.
Registrar of events. Ostsillografirovaniye block
The digital control system is supplied by the registrar of events. In non-volatile memory remain 31 oscillograms of start-up and stops of the engine, control system inclusion/power off.
Statistical information for all history:
- operating time of a control system and engine
- quantity of emergency shutdowns (counters for each type of accident)
The advanced ostsillografirovaniye block
Viewing of oscillograms from the registrar of events and statistics is possible with the help WITH Ajuster (on the interface) and the operator's panels.
Operator's panel, expanded service for registration of events:
- storage of oscillograms and statistics on the SD card (it is possible to take)
- the oscillogram is a continuous record of 30 days
- the oscillogram and statistics can be copied on a Flash-disk
- access to files is possible through Ethernet
- by means of the panel of the operator it is possible to check the oscillogram of any event, within randomly the set time interval