Boiler E 2,5-1,4GM (gas, fuel oil, liquid). Vapor pressure 1.4mpa.

Consumption of settlement fuel on 1 ton couple/hour: Natural gas in accordance with GOST 5542 - 83.5 m3/h; M100 Fuel oil on DSTU 4058 - 74,0kg/h;

Coal high-calorie ability of 25 MDzh/kg (6000 kcal/kg) - 147 kg/h. The complete set of delivery includes: smoke exhauster, fan, control devices, fittings, safety valve, gorelochny device, system of automatic equipment, vertical centrifugal pumps (120ºС, 3 years of a guarantee), gas valve and sensors "Krom Schroder".

The deserved recognitions as one of the best, pipe system of a copper, has essential no differences from the designs in due time offered scientific research institute TsKTI, however at production of coppers we apply all, the most well proved, quality control techniques. The pipe system of coppers is executed according to the scheme of a series of DE and ME, characteristic of coppers, however is finished taking into account requirements of a possibility of use of any gorelochny devices and a possibility of work with higher salinity of boiler water. For this purpose we reconsidered geometry of a furnace chamber and a design of the front of a copper, and also not warmed contour of lowering pipes is entered. In total the conceptual put advantages of these coppers:

- reliability,

- a possibility of work at high recurrence,

- low thermal tension of furnace chambers,

- the volume of the elements, smaller in comparison with zharotrubny coppers, which are under pressure.

- low paronapryazheniye of a mirror of evaporation,

- high efficiency of separation of drop moisture in a drum,

- ease of installation, adjustment, operation and repair,

- full constructive compensation of temperature expansions without increase in tension of the elements which are under pressure