Binding materials, Nile plaster

Buy binders, Nile plaster

An elastic decorative plaster that allows you to create surfaces with a complex texture of the skin of large reptiles using a special stamp, roller or stencil. Possesses high strength and durability. . . . After coating with wax, it is not afraid of water and acquires the properties of a washable coating.

INSTRUCTIONS FOR USE Nile is an elastic decorative plaster that allows you to create surfaces with a complex texture of the skin of large reptiles using a special stamp, roller or stencil. Possesses high strength and durability. After coating with Wax L wax, it is not afraid of water and acquires the properties of a washable coating. The coating is resistant to infection by microorganisms, including mold fungi. Tinting with pigment pastes for water systems is possible. Composition: aqueous suspension of pigments and filler in styrene - acrylic binder with functional additives. Scope: used for application on plasterboard, brick, concrete and stone surfaces, previously plastered and primed. Surface preparation: clean the painted surface from loose areas, dust, dirt, fat and other substances that impair adhesion. The surface must be flat and dry. Application scheme: 1. Primer - deep penetration impregnation Pénétration or Primer film - forming Imprgnation or Primer - antifungal impregnation Fix, depending on the type of surface to be painted. 2. Primer fortifying Quartz (Quartz) 3. Decorative plaster Nile (Nile) 4. Wax composition Wax L (Wax L). Application method: Stir thoroughly before use. Apply, spreading evenly over the surface, creating the required texture with a trowel, roller, brush, brush or other tools. It can be tinted either in bulk or with separate topcoats. After drying, apply a protective wax composition Ottimo Wax L. It can be painted over with water dispersion paints. Tools: steel trowel, roller, brush. Surface care during operation: painted surfaces can be washed with warm water with an alkaline detergent with a sponge, rags, and other non - abrasive materials no earlier than 7 days after painting. A slight change in gloss is allowed after washing. Dilution: water, ready to use, does not need to be diluted. Consumption: 1.2 - 2 kg / sq. m. in two layers. Packing: 1 kg, 7 kg. Application conditions: recommended application temperature - from + 15 ºС to + 30 ºС, relative humidity - no more than 75% . The temperature of the air and the surface to be painted should be approximately 3 ° C above the dew point. Drying time "to touch": no more than 1 hour at a temperature (20 ± 2) ºС and humidity not higher than 70% . Open exposure time (time until which it is possible to apply subsequent layers without damaging the previous one): no more than 20 minutes at a temperature (20 ± 2) ºС and humidity not higher than 70% . Complete drying time: no more than 7 days at a temperature (20 ± 2) ºС and humidity no higher than 70% . Cleaning of tools: with water. Coating service life: predicted service life under specified operating conditions from 8 years. Transportation and storage conditions: store and transport in hermetically sealed containers at temperatures from + 5 ºС to + 35 ºС. Protect from direct sunlight. Keep away from heating appliances. Expiration date: 24 months in original packaging. store and transport in hermetically sealed containers at temperatures from + 5 ºС to + 35 ºС. Protect from direct sunlight. Keep away from heating appliances. Expiration date: 24 months in original packaging. store and transport in hermetically sealed containers at temperatures from + 5 ºС to + 35 ºС. Protect from direct sunlight. Keep away from heating appliances. Expiration date: 24 months in original packaging.

Precautions: use gloves and overalls when working. Keep out of the reach of children. Odorless, fire and explosion proof. The dried coating has no harmful effects on humans. In case of contact with eyes, rinse with running water and seek medical advice. If swallowed, consult a doctor. Disposal: in accordance with current legislation.

The company's products are presented on the website https://ugspecsnab.com/