Bed mechanical medical functional E - 31
Due to its design, the E - 31 medical bed has become an indispensable assistant in the care of seriously ill patients in medical institutions.
Features of the design of the medical functional bed E - 31:
- A four - section metal bed with holes allows air to pass to the mattress.
- ABS backrests with long handles can be easily removed. On one of the backs there is a special cardholder in which the patient's card is placed, which is very convenient.
- Four wheels with a diameter of 12.5 cm with individual brakes provide a smooth and silent movement.
- Aluminum side rails are easily adjustable in two positions with a button (their height above the base is 35 cm).
- The position of the bed is controlled by three retractable handles that are hidden under the bed from the side of the leg section. Adjusters allow you to raise the torso section to a maximum angle of 75°, raise your knees at a 40° angle, and change the height of the bed from 36 to 64 cm.
- The coals and the base of the bed are equipped with shock - proof bumpers.
- The bed has holes for an infusion stand or a pull - up bar.
All this allows you to qualitatively care for the patient with maximum access to it from all sides and provides a comfortable position for the patient.
Optional accessories:
Bedside medical cabinet made of ABS plastic with dimensions: 470×470×750mm. The bedside table has a pull - out shelf, a drawer, a door, as well as hiding handles and hooks on the sides.
The infusion support has two hooks and two holders for cans, it is regulated on height.
The mattress is not included in the standard package, but it can be purchased separately. Its dimensions: 1910mm×890mm×80mm. The mattress is divided into 4 sections interconnected and consists of 3 layers: the lower and upper - polyurethane, in the middle - compressed coconut flakes. Everything is housed in a waterproof zippered case.
We also offer you to buy a bedside table for meals on wheels made of ABS plastic. It is easy to wash and adjustable in height from 75cm to 107cm. Surface size 81cm×44cm.
Complete set: 1. Base;
2. Mattress support frame;
3. Wheels - 4 pcs. ;
4. Side railings - 2 pcs. ;
5. Front and rear backrests;
6. Bolts, nuts and washers for fastening;
7. Instruction.
Characteristics:
Type of control Mechanical
Support type Castors
Number of sections 4
Maximum load 250 kg
Bed dimensions 2150×930 mm
Stock dimensions 1950×830 mm
Bed height 360 - 640 mm
The range of the angle of the section for back support 0 - 75°
Leg section elevation range 0 - 40°
Options:
Additional accessories for functional bed:
medical mattress
Table for meals
Bedside medical cabinet
infusion stand
Note: this model bed is sold complete with an infusion stand, the cost of the infusion stand is indicated separately.
