- Country of manufactureUkraine
Frame of a single bed with the lifting mechanism and the metal basis
Production is made, from a square metal profile pipe of 25*25 mm in size thickness threw 1,5 mm that gives you confidence in reliability and long-term use of these goods.
Becomes covered with the qualitative certified polymeric powder paint. The covering has attractive appearance, is steady against mechanical damages and corrosion. The frame has two central crossing points for durability.
The limiter of a mattress is manufactured of the round metal profile pipe D20. This modifier is intended for avoiding of shift of a mattress in the lifted condition of a frame.
The mechanism of raising of a frame of a bed consists from two a frame of mechanisms symmetrically established on each side right and left, intended for raising of a berth in the basis. This mechanism of transformation allows to lift a berth on a corner to 40 degrees. Existence of gas springs ensures smooth and silent functioning, increases durability and increases consumer properties of this product. Gas springs are provided three types 450N, 750N, 800N.
The metal basis consists of six parts: left and right tsarga, headboard, bedfoot, and also two central crossing points. Parts connect among themselves bolts and nuts. Overall dimensions of this design increase approximately by 7 cm on a ratio to a bed frame. For example, the bed frame 1900kh800mm, the basis will be the size approximately 1970kh870mm. The general height of this design makes 33 cm: 3 cm - support, 30 cm – the basis, from which the useful depth of a linen box of 18 cm. Useful depth can be increased due to change of height of the basis. Height varies from 30 to 50 cm with a step to 1 cm. The mattress utaplivatsya in the basis on 5 cm.