Automatic top of K+G Wetter AW 160 with the loader of 2003, the Angular top of K+G KRAMER+GREBE WW160

Automatic top of K+G Wetter AW 160 type 408 with the loader mast 2003.
For the fresh and frozen raw materials. The frozen raw materials are crushed previously on a blokorezka.
The working screw is optimized under the frozen raw materials.
The electromechanical drive is optimized under the frozen raw materials.
The drive of the giving screw three-speed (1,3/1,8/2,4 kW) is optimized under the frozen raw materials.
The basic device for a reception lattice is optimized under the frozen raw materials.
Short-term mode of a reverse.
A special set of the cutting tool under the frozen raw materials.
In automatic tops the giving and working screws have the identical direction of the course and are located one above another. Raw materials are transferred by the giving screw to the cutting camera to the working screw, when filling the camera raw materials are condensed. The working screw located on one axis with the cutting set gives raw materials on a working lattice. The working screw of automatic tops has the two-level drive, and giving – three-stage. Accurate work of all components allow to receive ideal result at the minimum rated capacity.
Diameter of a lattice is 160 mm
Productivity when processing
fresh meat 8000kg/ch
The volume of a loading funnel is 360 l.
Power of the drive of the giving screw, kW:
I speed 1,3
II speed 1,8
III speed 2.4
Power of the drive of the working screw, kW:
I speed 17,5
II speed 30
Rated power of connection is 32,5 kW
The cutting UNGER system (from 5 parts)
Height is 1750 mm, width is 2185 mm, depth is 1100 mm
Weight is 2180 kg
Angular top of K+G KRAMER+GREBE WW160
For the fresh, cooled, frozen to-5ºС meat after a blokorezka
Diameter of a lattice is 160 mm
The volume of a funnel is 360 l
Productivity is 6200 kg/h
The general power is 27/32 kW