Technical characteristics
- BrandKazstanex
- Country of manufactureTurkey
Description
Automatic lentochnopilny KMT 350 ODG PLC car
[cutting of preparation at 0 °: Krug350 - Kvadrat350 - Pryamougolnik320kh460mm]
Hydraulic Vise
-
-
-
-
-
-
-
Inverter It helps setting the blade speed between 25 - — - 90 - m/min by using this potentiometer.
Hydromechanical Band Tension - - -
PLC Control Unit
It is special designed for making machine control easier with language selections. Operator can make 100 - cutting program with different length and quantity. With this specification, companies can have maximum gain and minimum wastage of material. Operator can see all steps of operation and alarms of machine on screen and can prepare statistic of machine faults byusing alarm history. Operator also can see possible solutions of machine faults on screen and machine can be ready to work in a short time
Material Infeed Table with Rolls
Material Infeed Table with One Roll
[cutting of preparation at 0 °: Krug350 - Kvadrat350 - Pryamougolnik320kh460mm]
The Lentochnopilny equipment carries out continuous cutting of round metal hire, corners, pipes, channels on preparations of certain dimensional parameters. By means of lentochnopilny machines cutting of products is made of non-ferrous metals, the corrosion-proof and alloyed steel, cast iron.
| Technical characteristics: |
| Main motor | 4 - ~ 1400 - rpm |
| the cooling engine | 0,09 - ~ 0,12 - ~ 2800 - rpm |
| hydromotor | 0,37 - ~ 1400 - rpm |
| cutting speed | 25 ~ 90 - m/min. |
| Saw size | 4350 - 34 - - x 1,1 - mm. |
| weight | ~ 1350-... |
| Working height | ~ 740-... |
| Machine dimensions | ~ 1400 - 2200 - - x 1200 - mm. |
| giving engine | 0,37 - ~ 1400 - rpm |
-
| Technical characteristics: |
| Main motor | 4 - ~ 1400 - rpm |
| the cooling engine | 0,09 - ~ 0,12 - ~ 2800 - rpm |
| hydromotor | 0,37 - ~ 1400 - rpm |
| cutting speed | 25 ~ 90 - m/min. |
| Saw size | 4350 - 34 - - x 1,1 - mm. |
| weight | ~ 1350-... |
| Working height | ~ 740-... |
| Machine dimensions | ~ 1400 - 2200 - - x 1200 - mm. |
| giving engine | 0,37 - ~ 1400 - rpm |
| Opportunities are sharp: |
| 0 ° - | 350 - | 350 - | 320 - 460 - - mm |
| 45 ° - | 280 - | 280 - | 350 - 280 - - mm |
| 60 ° - | 180 - | 180 - | 180 - 180 - - mm |
| Standard complete set: |
Hydromechanical Band Tension - - -
PLC Control Unit
It is special designed for making machine control easier with language selections. Operator can make 100 - cutting program with different length and quantity. With this specification, companies can have maximum gain and minimum wastage of material. Operator can see all steps of operation and alarms of machine on screen and can prepare statistic of machine faults byusing alarm history. Operator also can see possible solutions of machine faults on screen and machine can be ready to work in a short time
Material Infeed Table with Rolls
Material Infeed Table with One Roll
Similar company products
Contact the seller
Automatic lentochnopilny KMT 350 ODG PLC car
