- Country of manufactureUkraine
Water-heating solid propellant heating coppers of MAGA PU are intended for convenient and economical heating by means of solid fuels (wood granules, pellets, coal). Thanks to the modern design they allow comfortable service comparative with gas coppers. They demand daily only 5 minutes of leaving.
The copper is formed by the welded sheet steel 5 mm thick with the heat exchanger with a pipe board. In the lower part of a copper on solid fuel from lateral face the retort torch with a pig-iron lattice in which by means of the screw conveyor the granulated fuel moves from the bunker is established. The bunker for fuel is installed near the boiler, and it is a delivery component.
The central electronic control system which automatically operates all work of a copper is built in a copper (loading of fuel from the bunker, control of temperature of a copper, control of the pump device, modulation of air supply for burning). Thanks to this regulation consumption is minimized by fuel.
It is not necessary to kindle a solid propellant copper often. In most cases it is enough to flood once a year. The regulator allows to adjust temperature at the exit of heating water, control of the feeder of fuel and modulation of the fan, control of parameters of the brake mode and control of the circulation pulser. A component is also sockets for connection of the room thermostat.
During the winter period will sustain one combined tank of fuel at the average power about 3 - 5 days, in the summer period during preparation of hot production water leaving only once within 7 - 10 days is required.
Fuel: wood pellets (granules), coal to fineness of 25 mm, after processing - grain and corn.