Asphalt distributor Kornet-8000 with oil heating

Asphalt distributor Kornet - 8000 with a unique high - performance systems, oil tanks and heating distributor.

On asphalt distributor bitumen pump installed its own production, thanks to the reverse function is filling asphalt distributor can be carried out by avtobitumovozov not equipped with its own bitumen pump.

Structural features :
- the heating system and setting asphalt distributor in a separate compartment behind the cab
- Tanker insulated basalt fiber layer 100 mm thick. This significantly reduces the heat loss during storage and transport of bituminous materials
- tsirkulyatsionngo distributor type with telescopic system razdvizheniya
- Hydraulic lifting and lowering system distributor
- Individual inclusion of each injector, a step which is 19 cm.
- Having an accurate metering system allows filling up to 0.1 l / m.

Highly system oil preheating :
- Eliminates burnout asphaltenes and deterioration bituminous material characteristics
- 30% reduced flow of diesel fuel for heating as compared to Zharov - flaming heating systems
- Use and heating of 100% of a bituminous material in the tank
- saving up to 30% bituminous material at the expense of the oil heating system
- an autonomous system eliminates the need to drain the tank between periods of operation

width of the distribution - to  5 meters!

INSTALLATION asphalt distributor

• Tank capacity 8 m³
• Actuators Hydraulic from independent engine
• Bituminous pump Gear, feeding 1.4L / v
• Heating bitumen in the tank, communications, distributor pump and bitumen oil heating with automatic maintenance of a predetermined temperature
• Heating rate of liquid bitumen in the tank at an initial temperature plus 80 ° C, ° C / h, at least 10
• Filling bitumen spreader circulation type
• Drive type lifting lowering distributor Hydraulic
• The number of nozzles, NY 26
• Maximum width bottling, m 5
• Changing the width bottling Multiple 0.19 m
• Manual dispenser bitumen presence
• Manual distributor hose length, m 5
• Specific filling rate, l / sq. m 0.3 - 2.5 m
• Changing regulations dispensing system for automatic control of pouring rate bitumen (accurate dosing system) controlled by the microcontroller, with manual override
• Hardware controls from the driver's cab