- Country of manufactureRussia
Important: We have indicated the cost of the machine without rollers, and which rollers are needed is chosen by the client himself (without imposing unnecessary rollers / options). The cost of the videos is listed below.
Manual machine for rolling a profile or strip. It is based on a block consisting of a collapsible welded body, gears, bearings and shafts. For ease of installation and dismantling, the places for installing replaceable rollers are placed on the side of the unit. It is not difficult to change the rollers, there is a keyway on the shafts, fixation for a bolt with a washer. The machine works in manual mode (handle included), it can also be hooked up to the electric drive through the output shaft (30mm).
Full possible machine functionality:
1) Decorative rolling profile
2) Rolled U - shaped (reinforcement of a professional pipe)
3) Rolling clamp strip
|Machine body:||Welded collapsible design|
|Landing shafts for rollers:||diameter 30 mm|
|Possibility of changing equipment:||Yes|
|Replaceable rollers for reinforcing the professional pipe:||yes ( purchased separately )|
|Profile sections for reinforcement||10, 15, 20 mm (thickness no more than 1.5 mm)|
|Reinforcement texture:||U - shaped|
|Replacement rollers for decorative rolled products :||yes ( purchased separately )|
|Profile sections for decor rolling:||15x15, 20x20 (thickness no more than 1.5 mm)|
|Replaceable clamp strip rollers :||yes ( purchased separately )|
|Sections of the strip for rolling:||1.5 x 18, 1.5 x 23 mm|
|The weight:||18 Kg|
Prices for videos:
1) Reinforcement of a profile pipe (10x10.15x15.20x20 mm) - 6,000 rubles.
2) Decorative rolled profile pipes - 6,500 rubles. (price per set / pair for one section of a profile with one texture, for example, a 20 * 20 profile with a "star" texture).
3) Rollers for creating a clamp strip - 9,000 rubles.