- Country of manufactureRussia
Countdown of the set time. It can be used with any technological equipment where there is a need for precise timing of the process. The time relay is a printed circuit board designed to be mounted inside the body of technological equipment.
Settable time intervals: 30, 60, 90, 120 min ± 5% , which are set using a switch installed on the front panel of the device or other convenient place. The time intervals can be changed upon request.
A triac is installed at the output of the time relay, capable of switching alternating current up to 3 A 220 V.
If it is necessary to switch a more powerful load, an intermediate relay can be used.
Overall dimensions: 65 × 55, mm. Distances between the centers of the fixing holes: 55 × 45 mm, the diameter of the fixing holes: 3.5 mm.
As an example, a diagram for connecting a time relay for controlling an oven for calcining and drying electrodes is shown.
- A1 - circuit breaker;
- SK1.1 - sensor - relay WIF 320C;
- HL1 - "Network" indicator;
- HL2 - "Heating" indicator;
- HL3 - indicator "Timer";
- SQ1 - Stop button;
- SQ2 - Start button;
- SA1 - switch "Heating time";
- EK1 - heater "TEN 3 kW";
- KM1 - switching relay.
|Warranty period of operation, months||36 from the date of commissioning, but not more than 42 from the date of manufacture|
Contents of delivery
|ENI - 480N||-||1||-|
|Passport, operation manual||-||1||-|
Designation when ordering
|ENI - 480N||360|
- Additional technological operating time 360 hours.
- EnI - 480N Passport, Operation manual 24.02.2014 (pdf)
- CJSC Novel
More details at http://www.eni-bbmv.ru/