The device automatic for determination of strength of plastic greasings Lintel SK-20

The device automatic for determination of strength of plastic greasings (State standard specifications 7143-73)

AUTOMATIC FUNCTIONS OF THE DEVICE:

• heating of a cell with a sample up to the set temperature;
• maintenance of the set sample temperature within 15 minutes before loading;
• smooth loading of the examinee of a sample with the set speed;
• determination of durability of the examinee of a product;
• display of information on the course and results of test on liquid crystal
• 4th lower case display;
• stop of process of test upon termination of the analysis;
• storing, possibility of viewing and the press through the serial port RS-232 to 300
• results of tests.

SPECIFICATIONS

1. The main sizes of working parts of the sensor of the device conform to requirements of GOST 7143-73:
1) radius of the internal cylinder of the sensor of 6,5±0,1 mm;
2) height of the internal cylinder of the sensor of 40±0,5 mm.
2. Range of durability of examinees of samples: from 40 to 2000 Pas
3. Error of measurement of durability:
1) in the range from 40 to 200, no more than 20 Pas;
2) in the range from 200 to 2000, no more than 10% of average size.
4. Discretization of measurement of durability: 1 Pas.
5. Range of possible temperatures of test of a sample: from plus 15 to plus 90 °C.
6. Discretization of installation of temperature: 1 °C.
7. Stability of maintenance of temperature of a sample: 0,2 °C.
8. Food parameters:
1) tension (220+22/-33)B;
2) frequency (50±1) of Hz;
3) power consumption: 1) when heating, not bolee:1050 In • And, at maintenance of temperature, no more: 100 V • And.
9. Overall dimensions of the device, no more: 400х300х440 mm.
10. Mass of the device, no more: 12 kg.
11. Warranty period of operation of the device: 12 months.

COMPLETENESS