- BrandАнатерм
- Country of manufactureRussia
contains the reactive urethane rubber giving additional properties and forming strong polymer in structure.
It is INTENDED for fixing, kontrovka and consolidation carving (for carving to M36) and smooth connections (gap to 0.3 mm) for the purpose of elimination of microleaks and creation of vacuum-tight flange threaded and cylindrical connections.
ADVANTAGES:
- prevents self-untwisting;
- provides sealing;
- protection of threaded connection against corrosion;
- possesses good vibrostability;
- perfectly works at reversal loads, pressure from 3*10 7 to 1*10 6 Pas, at influence of aggressive chemicals, radiation, rigid climatic conditions;
- possesses high chemical resistance;
- is glue-sealant of the accelerated hardening that allows to use it in conveyor productions at assembly of different nodes and details;
- has the raised moving moment in comparison with the moment of unscrewing and treats glues with controlled durability.
- one-component;
- thixotropic;
- product ready to application;
- possesses long life at storage.
Anaterm-114 represents the thixotropic composition possessing long life and property to be cured quickly in gaps between metallic surfaces.
TECHNICAL CHARACTERISTICS:
Dynamic viscosity on Brukfilda at 10 and 20 RPM, Mpa.s
3000 – 6000
1500-4000
Time of achievement of manual durability on carvings from M10x1,5 structural steel; mines 3 - 8
Time of through cure at 20-25 oC 3-8 hour.
The moving moment on carvings from M10x1,5 structural steel; N of m
in 3 hours - not less than 8
in 24 hours - not less than 12
The unscrewing moment on carvings from M10x1,5 structural steel; N of m 5-15
The stragivaiiya / unscrewing moment after endurance of threaded connections of 1000 hour, N. of m
at 150o C: 14 / 12
in the A-40 antifreeze at 90oC: 15 / 8
in M63G machine oil at 125oC: 10 / 4
in brake fluid at 90oC: 12 / 6
INSTRUCTIONS ON APPLICATION:
Before putting anaerobic adhesive the surface of details is cleared of pollution and degreased gasoline or toluene and acetone and other synthetic cleaners, free of nitrites.
After degreasing of detail dry before full evaporation of solvent.
Apply structure on one of details with uniform layer and collect node.
WAYS OF DRAWING:
- from the bottle supplied with tip dropper. Previously the tip of bottle is cut off, and upon termination of work close tip lid.
- when drawing by brush to pour sealant in pure polyethylene container of smaller capacity. The return discharge of product in the manufacturer's container is not allowed.
- by means of dosers of different type.
ATTENTION: feature of the used material is that its hardening happens only in certain gap, on free surface glue is not cured (that is not marriage) and is removed if necessary by means of rags.
PRECAUTIONARY MEASURES:
To store separately from foodstuff at temperature from +5 to +30 °C, to protect from influence of direct sunshine and hit of pollution in bottle.
At hit of sealant on skin to wash away it water with soap.
PACKING: it is delivered in polyethylene bottles with droppers tips on 50, 100, 200 g.
And r and N of t and y N y y with r about to x r and N e N and I am 1 g about.
The price for 100 g.
Быстрая и качественная консультация, вежливый персонал и индивидуальный подход.
Отличная продукция!
Буду обращаться еще!
С наилучшими пожеланиями, коллектив ООО "Адгезия".
• Цена актуальна
• Наличие актуально
• Заказ выполнен вовремя
• Описание актуально
Всё отлично. Быстро, конкретно и по делу. Молодцы!!!!