Akvadistillyator electric with a productivity of 10 liters in an hour, is intended for production of water for injections.
Quality of the made water conforms to requirements of article FS 42-2620-97 GF XI of the edition. Quality of initial water at the same time has to conform to requirements the SanPiN 126.96.36.1994-01 at content of ammonia in it no more than 0,2 mg/l. Makes both hot (+80 ºС), and cooled (no more +40ºС) water. Conductivity of the made water - 5х10-4 Cm/m. Easily integrates with the collection for storage of water in uniform system.
Akvadistillyator is used by AE-10 MO in medical institutions, drugstores, laboratories; in any production where use of water of the specified extent of cleaning is necessary.
The admission on productivity
Overall dimensions (DKHSHKHV), mm
Mass, no more, than a kg
Time of establishment of an operating mode, no more, min.
Amount of the consumed water, no more, than a l/h
wall and floor
- Prost is also convenient in operation;
- It is safe for environment;
- The body and the main details are manufactured of the high-alloyed stainless steel 12X18H10T (AISI 321);
- Built-in electroblock;
- Quick-detachable design of the camera of condensation over the evaporation camera for more free access and convenience of service and repair;
- The electronic sensor of water level in the evaporation camera;
- The removable refrigerator for receiving chilled water;
- Devices for clarification of steam from drops of not overtaken water;
- System of gas separation at purification of steam; One point of connection to the drainage line;
- Time of continuous work - no more than 8 hours; Operation Term - not less than 5 years.
Automatic shutdown TENOV at the termination of the centralized water supply; Automatic shutdown TENOV when lowering water in the camera of evaporation is lower than admissible; Automatic maintenance of an amount of water, going for evaporation;
Hose connecting - 2 pieces. A silicon drainage tube for discharge of the received water - 1 piece.
Automatic shutdown of an akvadistillyator when filling a catchment basin.
Standard complete set:
Floor placement of an akvadistillyator of AE-10 MO is carried out by means of a special support. The support is got for an additional fee.