Airbags in springs. Bila Tserkva
The airbag is inserted into a spring of a back suspension bracket. The price is over 1 set (2 pillows and two plugs)
The air (rubber) pillow is intended for increase in clearance, improvement of running characteristics of a stock suspension bracket, increases the maximum equipped weight, increases the term of life of shock-absorbers and springs, the back suspension bracket ceases �козлить�, breakdown of a back suspension bracket is excluded. Now you can take away bigger quantity of freight (when restriction was available on car height). In the winter increase in clearance, for preservation of passable qualities is useful. Minuses it is not found yet when using this device. She is not afraid of big loading because high-quality rubber is used by production of a detail. The pillow is stuck together from two halves. The similar pneumosuspension bracket can be used in a back suspension bracket only in cars with a separate spring and the shock-absorber (this option is used on the majority of cars).
Diameter of a pillow is 75 mm, length is 220 mm + 10 mm rubber plugs.
Instruction for application:
1. We put the car on a jack or we lift on the elevator. If in your car dredging is provided in the top part of a spring (cup), we insert accurately rubber washer (goes in a set) narrow part up
2. In the lowered state we insert a pillow between rounds into a spring, having distributed it so that the nipple from a pillow was located conveniently for pumping air and did not adjoin during further operation to the spring
3. We pump air by means of the compressor, exposing identical pressure.
4. We enjoy an elastic suspension bracket and more comfortable driving.
Use in the following cars is possible:
VAZ-2101, VAZ-2102, VAZ-2103, VAZ-2104, VAZ-2105, VAZ-2106, VAZ-2107, Field, Opel, Suzuki, Volvo, Mercedes, 190-124, Vito, Ford Focus, Ford Eskort, Ford Siyerra, Ford Fiyesta, Skoda, Deu Neksiya, Shevrole Lanos, Deu Espero, BB Toyota, Toyota Vitts, PLATZ, VITZ, YARIS, YARIS, ECHO, CHASER, CRESTA, MARK 2, Chevrolet Tahoe, Chevrolet lanos, Great Wall Hover, Geely MK, Ssang Yong Kyron,
Use in the following cars is not possible:
VAZ-2108, VAZ-2109, VAZ-2110, VAZ-2111, VAZ 2112, VAZ-2113, VAZ-2114, VAZ-2115, Mazda (Mazda) 626
Frequently asked questions:
Question 1: What working pressure?
Answer: from 0.5 BARS to 1,2 BARS. It does not mean that pillows will tear or there will be no effect. Factory characteristics will change for the worse (strong overestimate, less effective braking because of earlier blocking of blocks and the raised center of gravity) when using bigger pressure.
Question 2: What if the pillow bursts?
Answer: Any case was not recorded at the correct operation. At a rating of working pressure of 0.6-0.8 atmospheres of a rupture of pillows does not occur. The maximum pressure of 6 atmospheres at which there was a gap at experiments. Rubber thickness in the top and lower part of pillows makes about 10 mm.