Additive in the Remol-2 engine oil

The additive in the Remol-2 engine oil is suspension which basis is made by fine particles of copper, superficially active substances, basic (bezprisadochny) engine oil and other components which structure is a know-how of the company.

Differs in existence by ultradisperse (osobomelka) fraction, originality of structure, simplicity of application and unique manufacturing techniques.
Sometimes it is necessary to face opinion that the price of a preparation is proportional to its efficiency, but it not so. The price is directly connected with technology, its power and a resursozatratnost. And you, often getting rather expensive products, you can overpay only for use of the power-intensive and inefficient production technology.

The principle of action - the complex impact on the rubbing details based on effect of a selective mass transfer by means of in-place restoration of worn-out surfaces and the geometrical sizes of details.

When using Remol-2 the major principle is observed DO NOT DO MUCH HARM (even repeated overdose will lead only to the fastest manifestation of the greatest possible positive effect.

It is reached:
increase of a compression in cylinders (to 40);
alignment of a compression on cylinders;
restoration of power;
decrease in a consumption of oil on waste;
increase of pressure of oil;
economy of fuel (not less than 10%);
reduction of noise of the engine;
repeated decrease in the CO, CH level.;
increase in motor potential (not less than 200%)

Application:
To use only when replacing engine oil and the filter!

• To carefully mix bottle contents stirring (3-5 minutes);
• To fill in in a maslozalivny mouth;
• The deposit which remained to wash away in capacity pure oil and to fill in in a maslozalivny mouth;