- BrandБаромембранная Технология ООО
- Country of manufactureRussia
Accessories of systems of vacuum and pressure head filtering and special devices for laboratory filtering.
for placement of the disk filter in a filtering cell
|diameter of the filter||35 mm, 47 mm, 70 mm, 142 mm|
Bunsen's flask for filtering under vacuum and collecting a filtrate in devices with the vacuum pump or vacuum station. It is made of thermally resistant glass. In a flask the stopper with an opening for the union on connection of the filter moisture separator and vacuum pump is established.
Working volume - 500 ml, 1000 ml, 2500 ml, 5000 ml
Filter moisture separator
is established between a receiver and the vacuum pump for the purpose of prevention of hit of drop liquid from a flask in the camera of the pump. The filter is dried up and will be sterilized by autoclaving at a temperature of 121 °C within 20 minutes, maintains 20 cycles of autoclaving. The special disk of memory is intended for documenting of cycles of sterilization
|area of a filtration||20 cm2|
fixes a hose at the bottom of the container with the studied water. Represents the union with the flat basis at which lower end face there are four radial grooves for water pass.
|overall dimensions||48 mm x 28 mm|
Intaking and filtering device
fixes a hose at the bottom of capacity or in an open reservoir and it is applied when sampling water with the high content of the weighed substances. Represents the union with the welded two flat disks. On the lower disk the punched leaf on which the fabric filter is fixed is fixed. On the top disk three curved support are fixed.
|overall dimensions||180 mm h180 mm x 60 mm|
The filter for the intaking and filtering device
for preliminary cleaning of initial test of water before its giving on the membrane filter. Detains large particles, silt impurity and other suspensions, unloading the analytical filter. The filter is installed in the intaking and filtering device, is fixed by rubber rings. About 10 pieces in packing complete with rubber rings are delivered.
|overall dimensions||220 mm x 220 mm|
Portable power plant
the petrolgenerator – a compact source of autonomous power supply. It is used in devices of vacuum filtering for work in field conditions. For providing with electricity rather in due time to fill a fuel tank with gasoline.
|power consumption||2,5 kW max. / 2,2 kW in an operating mode|
|tank volume||3.6 l|
|time of continuous work||3,3. h|
|overall dimensions||56 40 x 46 cm|
|material||Ø vnutr||wall thickness|
|vacuum hose||silicone||6 mm||2,5 mm|
|pressure head hose||PVC||13 mm||2,5 mm|
|pressure head hose (hot water)||PVC||8 mm||3 mm|
|pressure head tube||PVC||4 mm||2 mm|