Less than 1 year old on Allbiz
One - packing material, universal modified - polymer primer - enamel.
It is used for painting metal surfaces, metal structures, pipelines, bridges, railways. wagons, equipment, ships, boats, etc.
The coating has a high drying rate, high gloss, good weather resistance, chemical resistance. Application at low temperatures is possible.
Appearance even uniform film
The color is tinted according to the RAL system
at (20 ± 5) ° С no more than 1 hour
The proportion of non - volatile substances is 53? 63%
Theoretical consumption per layer 160? 220 g / m2
Recommended thickness of one layer 60 - 80 microns
Operating temperature - 60 ° to + 110 ° С
1) Practical coverage depends on layer thickness, application method and conditions, surface roughness and product shape.
2) The thickness of one layer on a vertical surface depends on the degree of dilution of the material, temperature, application method, surface roughness and product shape.
METHODS AND CONDITIONS OF APPLICATION
Before use, the primer - enamel should be thoroughly mixed until a homogeneous mass is obtained.
Primer - enamel is applied with a brush, roller, pneumatic or airless spraying at an ambient temperature of minus 30 ° C to plus 40 ° C, the surface temperature should be 3 ° C above the dew point. If necessary, the primer - enamel is diluted to the working viscosity with the above thinner.
During the drying process, sharp temperature fluctuations should be avoided.
The material is flammable! Do not work near open sources of fire. Perform work with good ventilation, wearing rubber gloves, using personal protective equipment. Avoid inhalation and digestion. If the material comes into contact with the skin, wash it off with warm water and soap.
Store the material indoors, out of direct sunlight and moisture.
Similar company products